| Ca min - Mini segment position | 2,92 mm | ||
| a min - Min position Groove | 1,9 mm | ||
| Db min - Min stop ring position diameter | 45,5 mm | ||
| ra max - Max shaft & housing fillet radius | 0,6 mm | ||
| da max - Max shoulder diameter IR | 23 mm | ||
| BSF - Characteristic rolling element frequency | 3,783 Hz | ||
| BPFI - Characteristic inner ring frequency | 4,368 Hz | ||
| Tmax - Max operating temperature | 110 °C | ||
| Nlim - Grease lubrication limit speed | 12000 tr/min | ||
| Cu - Fatigue limit load | 0,355 kN | ||
| C - Dynamic load | 10,6 kN | ||
| Snap ring reference | R40 | ||
| D4 max - Max outer diameter of assembled stop ring | 44,6 mm | ||
| b max - Max groove width | 1,65 mm | ||
| D3 - Max bottom groove diameter | 38,1 mm | ||
| rs - Min fillet radius | 0,6 mm |
| a max - Max position groove | 2,06 mm | ||
| Brand | NTN | ||
| rNa max - Max fillet radius on segment side | 0,5 mm | ||
| Da max - Max shoulder diameter OR | 36 mm | ||
| da min - Min shoulder diameter IR | 21 mm | ||
| FTF - Characteristic cage frequency | 0,376 Hz | ||
| BPFO - Characteristic outer ring frequency | 2,632 Hz | ||
| Tmin - Min operating temperature | -25 °C | ||
| f0 - Coefficient | 12.80 | ||
| C0 - Static load | 4,6 kN | ||
| Radial clearance class | CN | ||
| f - Stop ring thickness | 1,12 mm | ||
| r0 max - Max bottom groove radius | 0,4 mm | ||
| b min - Min groove width | 1,35 mm | ||
| rNs - Min fillet radius | 0,5 mm | ||
| Ca max - Max segment position | 3,18 mm |
