Material cylinder barrel | Wrought aluminium alloy | ||
Material housing | Wrought aluminium alloy | ||
Material cover | Die-cast aluminium Coated | ||
Pneumatic connection | G1/4 | ||
Additional weight per 10 mm stroke | 89,7 g | ||
Additional moving mass per 10 mm stroke | 65,1 g | ||
Torsional backlash | 0,087 deg | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 633 N | ||
Impact energy in end positions | 0,7 J | ||
Suitable for use with food | See supplementary material information | ||
Corrosion resistance class CRC | 3 - high corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Operating pressure | 1,5 bar ... 12 bar | ||
Position detection | Via proximity switch | ||
Guide | Plain-bearing guide | ||
Cushioning | Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
Piston diameter | 40 mm |
Material piston rod | High-alloy stainless steel | ||
Material guide rod | High-alloy stainless steel | ||
Note on materials | RoHS-compliant | ||
Type of mounting | With through-hole Via female thread Either: | ||
Basic weight for 0 mm stroke | 3.000 g | ||
Moving mass for 0 mm stroke | 1.065 g | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 754 N | ||
Cushioning length | 20 mm | ||
Ambient temperature | -20 °C ... 80 °C | ||
LABS (PWIS) conformity | VDMA24364-B2-L | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Mode of operation | Double-acting | ||
Variants | For unlubricated operation | ||
Design | Guidance | ||
Mounting position | optional | ||
Operating mode, drive unit | Yoke | ||
Stroke | 10 mm ... 400 mm |