| Stroke | 125 mm | ||
| Material piston rod | Tempered steel Hard-chrome-plated | ||
| Material cover | Die-cast aluminium Anodised | ||
| Note on materials | RoHS-compliant | ||
| Pneumatic connection | Rc1/4 | ||
| alternative connections | See product drawing | ||
| Basic weight for 0 mm stroke | 1.600 g | ||
| Moving mass for 0 mm stroke | 741 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1.682 N | ||
| Impact energy in end positions | 1,3 J | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Double-acting | ||
| Piston-rod end | Male thread with rod clevis | ||
| Speed regulation | Integrated flow control at both ends | ||
| Mounting position | optional | ||
| Broad rod clevis/swivel mounting | 16,5 mm | ||
| Piston diameter | 63 mm |
| Material cylinder barrel | Wrought aluminium alloy Anodised | ||
| Material seals | NBR | ||
| Material wiper | Bronze | ||
| Material rod clevis | Cast steel Tempered steel | ||
| Type of mounting | Via swivel mounting on bearing cap With accessories | ||
| Additional weight per 10 mm stroke | 42 g | ||
| Additional moving mass per 10 mm stroke | 25 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1.870 N | ||
| Cushioning length | 20 mm | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Operating pressure | 1 bar ... 10 bar | ||
| Position detection | Via proximity switch | ||
| Design | Piston Piston rod with rod clevis Swivel mounting on bearing cap Cylinder barrel | ||
| Cushioning | Pneumatic cushioning, adjustable at both ends | ||
| Piston rod thread | M16x1.5 |
