| Guidance rib diameter of inner ring | d1 | 136.50 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 2 | mm |
| Distance between the apexes of the pressure cones | a | 40 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 2.50 | mm |
| Maximum fillet radius of shaft | ra max | 2.50 | mm |
| Maximum diameter of housing shoulder | Da max | 155 | mm |
| Maximum diameter of shaft shoulder | da max | 111 | mm |
| Minimum axial space | Ca min | 12 | mm |
| Minimum diameter of shaft shoulder | db min | 110 | mm |
| Thermal speed rating | nϑr | 2,700 | |
| Fatigue load limit, radial | Cur | 63,000 | |
| Basic dynamic load rating, radial | Cr | 309,000 | |
| Width, outer ring | B | 40 | mm |
| Outside diameter | D | 165 | mm |
| Limiting speed | nG | 3,200 | |
| Basic static load rating, radial | C0r | 520,000 | |
| Width, total | T | 52 | mm |
| Width, inner ring | Bi | 52 | mm |
| Bore diameter | d | 100 | mm |
