| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3 | mm |
| Distance between the apexes of the pressure cones | a | 51 | mm |
| Guidance rib diameter of inner ring | d1 | 164.30 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 2.50 | mm |
| Maximum fillet radius of housing | rb max | 2.50 | mm |
| Minimum axial space | Ca min | 11.50 | mm |
| Maximum diameter of housing shoulder | Da max | 203 | mm |
| Maximum diameter of shaft shoulder | da max | 136 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Minimum diameter of housing shoulder | Da min | 204 | mm |
| Minimum diameter of shaft shoulder | db min | 132 | mm |
| Thermal speed rating | nϑr | 2,150 | 1/min |
| Fatigue load limit, radial | Cur | 107,000 | N |
| Basic dynamic load rating, radial | Cr | 570,000 | N |
| Width, outer ring | B | 50 | mm |
| Outside diameter | D | 215 | mm |
| Limiting speed | nG | 3,800 | 1/min |
| Basic static load rating, radial | C0r | 730,000 | N |
| Width, total | T | 61.50 | mm |
| Width, inner ring | Bi | 58 | mm |
| Bore diameter | d | 120 | mm |
