| Bore diameter | d | 25 | mm |
| Width, outer ring | B | 11.50 | mm |
| Outside diameter | D | 47 | mm |
| Limiting speed | nG | 15,800 | |
| Basic static load rating, radial | C0r | 31,500 |
| Width, total | T | 15 | mm |
| Width, inner ring | Bi | 15 | mm |
| Thermal speed rating | nϑr | 9,400 | |
| Fatigue load limit, radial | Cur | 3,450 | |
| Basic dynamic load rating, radial | Cr | 26,500 |
| Guidance rib diameter of inner ring | d1 | 37.10 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 0.60 | mm |
| Distance between the apexes of the pressure cones | a | 12 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 0.60 | mm |
| Maximum fillet radius of shaft | ra max | 0.60 | mm |
| Maximum diameter of housing shoulder | Da max | 42 | mm |
| Maximum diameter of shaft shoulder | da max | 30 | mm |
| Minimum axial space | Ca min | 3.50 | mm |
| Minimum diameter of shaft shoulder | db min | 30 | mm |
