| Guidance rib diameter of inner ring | d1 | 109.60 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 2 | mm |
| Distance between the apexes of the pressure cones | a | 28 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 2.50 | mm |
| Maximum fillet radius of shaft | ra max | 2.50 | mm |
| Maximum diameter of housing shoulder | Da max | 130 | mm |
| Maximum diameter of shaft shoulder | da max | 91 | mm |
| Minimum axial space | Ca min | 6 | mm |
| Minimum diameter of shaft shoulder | db min | 90 | mm |
| Thermal speed rating | nϑr | 3,400 | |
| Fatigue load limit, radial | Cur | 22,400 | |
| Basic dynamic load rating, radial | Cr | 146,000 | |
| Width, outer ring | B | 22 | mm |
| Outside diameter | D | 140 | mm |
| Limiting speed | nG | 4,160 | |
| Basic static load rating, radial | C0r | 190,000 | |
| Width, total | T | 28.25 | mm |
| Width, inner ring | Bi | 26 | mm |
| Bore diameter | d | 80 | mm |
