| Bore diameter | d | 65 | mm |
| Width, outer ring | B | 20 | mm |
| Outside diameter | D | 120 | mm |
| Limiting speed | nG | 6,100 | |
| Basic static load rating, radial | C0r | 140,000 |
| Width, total | T | 24.75 | mm |
| Width, inner ring | Bi | 23 | mm |
| Thermal speed rating | nϑr | 3,800 | |
| Fatigue load limit, radial | Cur | 16,600 | |
| Basic dynamic load rating, radial | Cr | 115,000 |
| Guidance rib diameter of inner ring | d1 | 90 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 24 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 2 | mm |
| Maximum fillet radius of shaft | ra max | 2 | mm |
| Maximum diameter of housing shoulder | Da max | 111 | mm |
| Maximum diameter of shaft shoulder | da max | 77 | mm |
| Minimum axial space | Ca min | 4.50 | mm |
| Minimum diameter of shaft shoulder | db min | 74 | mm |
