| Caliber diamter inner ring | d2 | 8.30 | mm |
| Minimum chamfer dimension | rmin | 0.30 | mm |
| Distance between the apexes of the pressure cones | a | 8.80 | mm |
| Caliber diameter outer ring | D2 | 14.80 | mm |
| Contact angle | α | 25 | ° |
| Maximum fillet radius | ra max | 0.30 | mm |
| Minimum diameter shaft shoulder | da min | 8 | mm |
| Maximum diameter of housing shoulder | Da max | 15 | mm |
| Reference speed | nϑr | 32,000 | |
| Fatigue load limit, radial | Cur | 74 | N |
| Basic dynamic load rating, radial | Cr | 3,050 | |
| Outside diameter | D | 17 | mm |
| Limiting speed | nG | 31,500 | |
| Basic static load rating, radial | C0r | 1,400 | |
| Width | B | 9 | mm |
| Bore diameter | d | 6 | mm |
