| Width | B | 66 | mm |
| Bore diameter | d | 105 | mm |
| Limiting speed for grease lubrication | nG Grease | 3,600 | |
| Basic static load rating, axial | C0a | 250,000 | |
| Width, outer ring | B | 33 | mm |
| Outside diameter | D | 160 | mm |
| Limiting speed for oil lubrication | nG Oil | 4,800 | |
| Fatigue load limit, axial | Cua | 20,000 | |
| Basic dynamic load rating, axial | Ca | 74,000 |
| Width of lubricating groove | ns | 9.50 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Rip diameter shaft washer | d1 | 142 | mm |
| Diameter lubrication hole | ds | 4.80 | mm |
| Height wave disc | B1 | 16.50 | mm |
| Distance between the apexes of the pressure cones | a | 266.50 | mm |
| Maximum recess radius | ra max | 0.60 | mm |
| Shoulder diameter outer ring | Da | 150 | mm |
| Diameter shaft shoulder | da | 128 | mm |
| Contact angle | α | 60 | ° |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Manufacturer | Part Number |
|---|---|
| SNFA | BDX105 |
| NSK | 105TAC20XPN7+L |
| GPZ Bearings | 178821 |
| SKF | 234421 |
| NTN | 562021.P5 |
| Marlin-Rockwell Corp. | DT121 |
| Schiess-Froriep | 303438 |
