| Width | B | 36 | mm |
| Bore diameter | d | 40 | mm |
| Limiting speed for grease lubrication | nG Grease | 8,500 | |
| Basic static load rating, axial | C0a | 58,000 | |
| Width, outer ring | B | 18 | mm |
| Outside diameter | D | 68 | mm |
| Limiting speed for oil lubrication | nG Oil | 12,000 | |
| Fatigue load limit, axial | Cua | 5,400 | |
| Basic dynamic load rating, axial | Ca | 22,800 |
| Width of lubricating groove | ns | 4.80 | mm |
| Minimum chamfer dimension | rmin | 0.15 | mm |
| Rip diameter shaft washer | d1 | 58.50 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
| Height wave disc | B1 | 9 | mm |
| Distance between the apexes of the pressure cones | a | 113.50 | mm |
| Maximum recess radius | ra max | 0.15 | mm |
| Shoulder diameter outer ring | Da | 63.50 | mm |
| Diameter shaft shoulder | da | 51.50 | mm |
| Contact angle | α | 60 | ° |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
