| Width of lubricating groove | ns | 17.70 | mm |
| Raceway diameter of the inner ring | d2 | 185.30 | mm |
| Minimum chamfer dimension | rmin | 4 | mm |
| Diameter lubrication hole | ds | 9.50 | mm |
| Bore diameter outer ring | D1 | 273.20 | mm |
| Minimum cavity width of the sleeve | Ba min | 8 | mm |
| Maximum recess radius | ra max | 3 | mm |
| Maximum diameter of shaft shoulder | da max | 185 | mm |
| Minimum cavity diameter of the sleeve | db min | 163 | mm |
| Maximum diameter of housing shoulder | Da max | 303 | mm |
| Minimum diameter shaft shoulder | da min | 167 | mm |
| Reference speed | nϑr | 1,520 | |
| Fatigue load limit, radial | Cur | 151,000 | |
| Basic dynamic load rating, radial | Cr | 1,640,000 | |
| Outside diameter | D | 320 | mm |
| Limiting speed | nG | 2,290 | |
| Basic static load rating, radial | C0r | 1,850,000 | |
| Width | B | 108 | mm |
| Bore diameter | d | 150 | mm |
