| pumps | aec028l09aaa1aa4314000a0 200100cd01b | ||
| displacement | 028 : 28.0 cm3/r [1.71 in3/r] | ||
| front mounting & input shaft | 09 : 2 bolt b (sae j744-101-2) with 13 tooth 16/32 spline (ansi b92.1-1996 mod.) 41.1[1.62] shaft ext | ||
| drain port size & location | a : .875-14 unf-2b o-ring port - top (28cc) | ||
| controller type | aa : pressure and flow compensator with .4375-20 sae o-ring load sense port left side | ||
| flow compensator setting | 14 : 12,41-15,17 bar [180-220 lbf/in2] | ||
| control special features | 0a : bleed down orifice | ||
| auxiliary (rear) mount & output shaft | 00 : no auxiliary mount | ||
| pump special features | 00 : no pump special features | ||
| design code | b : second design |
| code title | aec : 220 series mobile piston pump | ||
| input shaft rotation | l : left-hand rotation (ccw) left side suction port, right side pressure port | ||
| main ports size & location | aa : rear port; suction 1.625-12 un-2b sae o-ring; pressure 1.0625-12 un-2b sae o-ring | ||
| diagnostic pressure ports | 1 : .4375-20 unf-2b sae o-ring ports - suction and pressure - plugged | ||
| pressure compensator setting | 43 : 275.8-282.7 bar [4000-4100 lbf/in2] | ||
| secondary compensator setting | 00 : no secondary compensator setting | ||
| maximum displacement option | 02 : external manual stroke adjustment (set at maximum) | ||
| shaft seal | 1 : fluorocarbon rubber shaft seal | ||
| paint | cd : blue primer per spec 209-13cd (standard) |
