| Brand | snr | ||
| BRF - Rotational frequency – rolling element (60 rpm) | 2,62 Hz | ||
| BPFI - Over rolling frequency on inner (60 rpm) | 5,922 Hz | ||
| Recommended tightening torque for set screw | 22 N-m | ||
| Operating temperature max. | 200 °C | ||
| C0 - Static load rating | 29,2 kN | ||
| SW - Wrench size | 5 mm | ||
| S - Distance front side/bearing centre | 11,8 mm | ||
| m - Distance to set screw | 9,8 mm | ||
| D - Outer diameter of OR | 100 mm | ||
| C1 - Distance center of OR to center of lubrication zone | 7,2 mm | ||
| B - Width of Inner Ring | 45,3 mm |
| FTF - Rotational frequency - cage (60 rpm) | 0,408 Hz | ||
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,24 Hz | ||
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,078 Hz | ||
| mass | 1,07 kg | ||
| Operating temperature min. | -20 °C | ||
| C - Dynamic load rating | 43,55 kN | ||
| f0 - Factor | 14,40 | ||
| r - Radius Inner Ring | 1,10 | ||
| G - Set screw size | M10x1,25 | ||
| d - Shaft diameter | 55 mm | ||
| C - Width of Outer Ring | 23 mm |
