a)
Hydraulic connection*) G1 on two sides
b)
In addition, both middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| Componente Industrial | 70 | mm | |
| B3 | 105 | mm | |
| E2 | 45 | mm | |
| Fuerza | 9,50 | mm | |
| H | 36 | mm | |
| N1 (For mounting from below with ISO 4762) | 9 | mm | |
| S1 | 6,80 | mm |
| B1 | 92 | mm | |
| E1 | 57 | mm | |
| E3 | 40 | mm | |
| G1 | 1/8" | ||
| H1 | 30 | mm | |
| N2 (For mounting from below with DIN 7984) | 7,30 | mm | |
| S2 | M8 |
| Fuerza de sujeción (The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). For permissible holding forces see “Technical data and calculations.” ,At 100 bar) | 2.200 | N | |
| Presión hidráulica máxima de operación | 100 | bar | |
| Condiciones de operación | Operating conditions | ||
| Temperatura ambiente permitida (mín ... máx) | 0 °C ... +70 °C |
| Volumen de absorción (Per clamping) | 0,60 | cm³ | |
| Masa | 1,22 | kg | |
| Tamaño | 25 |
