a)
Hydraulic connection*) G1 on two sides
b)
In addition, both middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| Componente Industrial | 170 | mm | |
| B3máx | 256 | mm | |
| E2 | 110 | mm | |
| Fuerza | 20 | mm | |
| H | 90 | mm | |
| N1 (For mounting from below with ISO 4762) | 23 | mm | |
| S1 | 14,50 | mm |
| B1 | 227 | mm | |
| E1 | 142 | mm | |
| E3 | 82 | mm | |
| G1 | 1/4" | ||
| H1 | 76 | mm | |
| N2 (For mounting from below with DIN 7984) | 14 | mm | |
| S2 | M16 |
| Fuerza de sujeción (The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). For permissible holding forces see “Technical data and calculations.” ,At 150 bar) | 22.700 | N | |
| Presión hidráulica máxima de operación | 150 | bar | |
| Condiciones de operación | Operating conditions | ||
| Temperatura ambiente permitida (mín ... máx) | 0 °C ... +70 °C |
| Volumen de absorción (Per clamping) | 3,80 | cm³ | |
| Masa | 17,30 | kg | |
| Tamaño | 65 |
