| Par de torsión | 4,50 | mm | |
| Válvula | 5 | mm | |
| Componente Industrial | 40 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 22 mm ±0.01 | ||
| N | 8 | mm | |
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M4x12 |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 4 | mm | |
| Válvula | 50 | mm | |
| e | 29 | ||
| protección de máquina | 5,80 | ||
| O1 (DIN 6912-8.8) | M4x20 | ||
| Par de torsión (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 75 | mm |
| protección de máquina | 1,75 | kg |
