| Material de los tornillos | Steel | ||
| Material del cuerpo | PA-reinforced PPS reinforced | ||
| Nota sobre el material | RoHS-compliant | ||
| Conexión neumática 1 | QS-6 | ||
| Longitud del cable | 2,5 m | ||
| Peso del producto | 85 g | ||
| Temperatura del medio | -5 °C ... 60 °C | ||
| Temperatura de almacenamiento | -20 °C ... 50 °C | ||
| Clase de resistencia a la corrosión CRC | 2 - Moderate corrosion stress | ||
| Nota sobre el medio de trabajo/mando | Lubricated operation not possible | ||
| Fluctuaciones de tensión admisibles | +/- 10 % | ||
| Trigger signal voltage range DC | 3 V ... 30 V | ||
| Input resistance | 34 kOhm | ||
| Tolerance switching time on | +/-15% | ||
| Switching time off 0.6 MPa (6 bar, 87 psi) and 24 V in new condition | 0,6 ms | ||
| Switching time off 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition | 0,8 ms | ||
| Switching time off 0.4 MPa (4 bar, 58 psi) and 24 V in new condition | 0,6 ms | ||
| Frecuencia de conmutación máx. | 500 Hz | ||
| b value | 0,36 | ||
| Protección contra inversión de polaridad | For operating voltage | ||
| Sentido de flujo | Non-reversible | ||
| Accionamiento manual auxiliar | None | ||
| Principio de sellado | Hard | ||
| Operating conditions to DIN VDE 0580 | S3 50% 20 min. with individual valve S3 25% 20 min. with block mount | ||
| Marcado CE (véase la declaración de conformidad) | To EU EMC Directive | ||
| Certificación | RCM trademark | ||
| Tipo de reposición | Pneumatic spring | ||
| Presión de funcionamiento | 0,5 bar ... 6 bar | ||
| Conexión neumática de utilización | QS-6 | ||
| Anchura | 10 mm | ||
| Función de la válvula | 2/2-way, closed, monostable |
| Material de la cubierta aislante del cable | PUR | ||
| Material de las juntas | HNBR | ||
| Conexión neumática 2 | QS-6 | ||
| Tipo de fijación | In-line installation With through-hole Either: | ||
| Conexión eléctrica | 3-wire Cable | ||
| Temperatura ambiente | -5 °C ... 60 °C | ||
| Permissible solenoid surface temperature | 120 °C | ||
| Conformidad PWIS | VDMA24364-B2-L | ||
| Restrictions for environmental and media temperature | As a function of switching frequency (see graph) | ||
| Medio de funcionamiento | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Note on input current | Linear rise 0.09-0.44 mA with a trigger signal of 3-15 V 0.44-15.44 mA with a trigger signal of 15-30 V | ||
| Valores característicos de las bobinas | 24 V DC: low-current phase 3.2 W, high-current phase 14.5 W | ||
| Margen de tensiones de servicio DC | 21,6 V ... 26,4 V | ||
| Tolerance switching time off | +15%/-25% | ||
| Switching time on 0.6 MPa (6 bar, 87 psi) and 24 V in new condition | 1,3 ms | ||
| Switching time on 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition | 1 ms | ||
| Switching time on 0.4 MPa (4 bar, 58 psi) and 24 V in new condition | 1,2 ms | ||
| C value | 0,66 l/sbar | ||
| Funciones adicionales | Spark arresting Holding current reduction with energy recovery Safety shut-off | ||
| Símbolo | 00992259 | ||
| Tipo de control | Direct | ||
| Posición de montaje | optional | ||
| Note on operation | Fixed power supply must be able to supply at least 1.7 A without voltage drop Do not operate without flow. | ||
| Patrón uniforme | 10,5 mm | ||
| Símbolo KC | KC-EMV | ||
| Grado de protección | IP55 | ||
| Forma constructiva | Poppet valve without spring return | ||
| Operating voltage | 24V DC | ||
| Standard nominal flow rate | 160 l/min | ||
| Tipo de accionamiento | Electric |