| Maximum witdh of thrust washer | B1 | 13,20 | mm |
| Width, outer ring | C | 12 | mm |
| Minimum chamfer dimension | rmin | 0,30 | mm |
| Rosca | M10X1 | ||
| Width of flats | W | 5 | mm |
| Bolt/stud length effectively | B2 | 23 | mm |
| Protrusion outer ring to thrust washer | C1 | 0,60 | mm |
| Stop diameter of thrust washer | d2 | 17,50 | mm |
| Thread length | IG | 12 | mm |
| Radius of outer ring outside profile | R | 500 | mm |
| Speed on permanent grease lubrication | nD G | 8,000 | |
| Basic static load rating, radial | C0r | 5,400 | |
| Width of the roller stud | B | 36 | mm |
| Diámetro exterior | D | 22 | mm |
| Fatigue load limit, radial | Cur | 740 | N |
| Basic dynamic load rating, radial | Cr | 4,500 | |
| Fit diameter of roller stud / stud | d1 | 10 | mm |
| Fabricante | Referencia |
|---|---|
| NTN | KR22 FH (NTN) |
