| Material setting screw | High-alloy steel | ||
| Material sensor rail | Wrought aluminium alloy Anodised | ||
| Material swivel lever | Case-hardened steel Burnished | ||
| Material del retenedor | Wrought aluminium alloy Anodised | ||
| Material spring pressure piece | High-alloy steel | ||
| Material stops | High-alloy steel | ||
| Peso del producto | 3.000 g | ||
| Max. radial force at drive shaft | 45 N | ||
| Momento máximo Mz | 1,5 Nm | ||
| Momento Mx máximo | 1,5 Nm | ||
| Max. drive torque at drive shaft | 1,25 Nm | ||
| Repetition accuracy end positions | +/-0.02 mm | ||
| Forma constructiva | Drive shaft Linear guide plus ball bearing Force pilot operated motion sequence | ||
| Amortiguación | Noise reduction via buffers | ||
| Max. linear stroke with 90° swivel angle | 142/142 mm | ||
| Working stroke | 15 mm ... 25 mm |
| Material bar | Wrought aluminium alloy Anodised | ||
| Material slotted guide plate | Case-hardened steel Hardened | ||
| Material cross-guide | Tempered steel | ||
| Material base plate | Wrought aluminium alloy Anodised | ||
| Material de la tapa | Wrought aluminium alloy Anodised | ||
| Tipo de fijación | Via through-hole and centring sleeve | ||
| Max. process force in Y direction | 35 N | ||
| Max. effective load | 1 kg | ||
| Momento My máx. | 1,5 Nm | ||
| Max. axial force at drive shaft | 18 N | ||
| Temperatura ambiente | 0 °C ... 60 °C | ||
| Detección de posición | Via proximity switch | ||
| Posición de montaje | optional | ||
| Z stroke | 80 mm ... 100 mm | ||
| Tamaño | 12 |