| Bore diameter bearing | d | 30 | mm |
| Width inner ring | B | 22 | mm |
| Basic static load rating, radial | C0r | 139,000 |
| Outside diameter bearing | D | 47 | mm |
| Basic dynamic load rating, radial | Cr | 65,900 |
| Edge Spacing | r1smin | 0,60 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Juego radial | Gr | 0 - 0,05 | |
| Shank diameter, large | d5 | 50 | mm |
| length rod end shank | l5 | 15 | mm |
| Thread length Internal thread | l3 | 56 | mm |
| Width of the rod end | C1 | 19 | mm |
| Shank diameter | d4 | 40 | mm |
| Outer eye diameter | d2 | 73 | mm |
| Ball diameter | dK | 40,70 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Width Across Flat | W | 41 | mm |
| Distance drilling with/shaft start | l7 | 37 | mm |
| Total length internal thread head | l4 | 146,50 | mm |
| Tilt angle | α | 6 | ° |
| Shank Length Internal thread head | h1 | 110 | mm |
| Thread size | d3 | M30x2 | |
| Outer flange diameter inner ring | d1 | 34,20 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | EF30-20-501 (DURBAL) |
| Askubal | EJ30-D |
| SKF | SI30 C (SKF) |
| SKF | SI30DC |
