| Brand | snr | ||
| BRF - Rotational frequency – rolling element (60 rpm) | 2,041 Hz | ||
| BPFI - Over rolling frequency on inner (60 rpm) | 4,927 Hz | ||
| Recommended tightening torque for set screw | 65,2 N-m | ||
| Operating temperature max. | 100 °C | ||
| C0 - Static load rating | 140 kN | ||
| SW - Wrench size | 9,525 mm | ||
| S - Distance front side/bearing centre | 50 mm | ||
| m - Distance to set screw | 14,5 mm | ||
| D - Outer diameter of OR | 215 mm | ||
| d - Shaft diameter | 101,6 mm | ||
| C - Width of Outer Ring | 54 mm | ||
| B1 - Overall width Inner Ring | 128,6 mm |
| FTF - Rotational frequency - cage (60 rpm) | 0,384 Hz | ||
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,082 Hz | ||
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,073 Hz | ||
| mass | 12,85 kg | ||
| Operating temperature min. | -20 °C | ||
| C - Dynamic load rating | 171,6 kN | ||
| f0 - Factor | 13,20 | ||
| r - Radius Inner Ring | 3,50 | ||
| G - Set screw size | 3/4-16UNF | ||
| d1 - Outer dia of eccent. Lock. collar / nut of adapter sleeve | 146 mm | ||
| C1 - Distance center of OR to center of lubrication zone | 19 mm | ||
| B2 - Width of eccentric locking collar/nut | 36,5 mm | ||
| B - Width of Inner Ring | 100 mm |
