| Brand | snr | ||
| BRF - Rotational frequency – rolling element (60 rpm) | 2,584 Hz | ||
| BPFI - Over rolling frequency on inner (60 rpm) | 5,934 Hz | ||
| Recommended tightening torque for set screw | 22 N-m | ||
| Operating temperature max. | 200 °C | ||
| C0 - Static load rating | 32,8 kN | ||
| SW - Wrench size | 5 mm | ||
| S - Distance front side/bearing centre | 12 mm | ||
| m - Distance to set screw | 8 mm | ||
| D - Outer diameter of OR | 110 mm | ||
| d - Shaft diameter | 60 mm | ||
| C - Width of Outer Ring | 24 mm | ||
| B1 - Overall width Inner Ring | 49,3 mm |
| FTF - Rotational frequency - cage (60 rpm) | 0,407 Hz | ||
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,168 Hz | ||
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,066 Hz | ||
| mass | 1,2 kg | ||
| Operating temperature min. | -20 °C | ||
| C - Dynamic load rating | 52,5 kN | ||
| f0 - Factor | 14,20 | ||
| r - Radius Inner Ring | 1,10 | ||
| G - Set screw size | M10x1,25 | ||
| d1 - Outer dia of eccent. Lock. collar / nut of adapter sleeve | 82 mm | ||
| C1 - Distance center of OR to center of lubrication zone | 8 mm | ||
| B2 - Width of eccentric locking collar/nut | 22,3 mm | ||
| B - Width of Inner Ring | 33,4 mm |
