0
Festo

8083935 Festo

8083935-1 8083935-2 8083935-3 8083935-4 8083935-5 8083935-6
8083935-2 8083935-3 8083935-4 8083935-5 8083935-6 8083935-7

FESTO 8083935 Unidad de eje de accionamiento por correa dentada

ELGE-TB-35-500-0H-ST-M-H1-PLK-AA-AT-FR

$1.455,72
Stock Limitado solo disponible bajo consulta

Especificaciones

Serie (ELGE) Gantry axis
Drive system (TB) Toothed belt
Guía Recirculating ball bearing guide
Tamaño (35) 35
Stroke [mm] (500) 500
Stroke reserve (0H) None
Motor type (ST) Stepper motor ST
Controller (M) Integrated
Control panel (H1) Integrated
Bus protocol/activation (PLK) PNP and IO-Link®
End-position sensing (AA) With integrated end-position sensing
Cable outlet direction (AT) Top
Motor position (FR) Front right
Profile mounting None
Proximity sensor, inductive, slot 8, N/O contact, cable 7.5 m Without
Proximity sensor, inductive, slot 8, N/C contact, cable 7.5 m Without
Slot nut for mounting slot Without
Electrical accessories None
Material toothed belt Polychloroprene with glass filament and nylon coating
Material slide Anodised wrought aluminium alloy
Material drive cover Anodised wrought aluminium alloy
Material profile Anodised wrought aluminium alloy
Logic interface, number of pins/wires 8
Logic interface, connection type Plug
Switching logic for inputs PNP (positive switching)
Longitud máx. del cable 15 m outputs 15 m inputs 20 m with IO-Link® operation
IO-Link®, duración mínima de ciclo 1 ms
IO-Link®, contenido de los datos de proceso IN 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out)
IO-Link®, contenido de los datos de proceso OUT 1-bit (move in) 1-bit (move out) 1-bit (quit error)
IO-Link, Number of ports Device 1
IO-Link®, Communication mode COM3 (230.4 kBaud)
Features of logic input Configurable Not galvanically isolated
Working range of logic input 24 V
Number of digital logic inputs 2
Peso del producto 3.740 g
Reference value operational performance 5.000 km
Reference value effective load, horizontal 2,8 kg
Fuerza Fz máxima 50 N
2nd moment of area Iz 4.190 mm⁴
Note on ambient temperature Power must be reduced by 2% per K at ambient temperatures above 30°C.
Clase de protección III
Humedad relativa del aire 0 - 90%
Conformidad PWIS VDMA24364 zone III
Resistencia a las vibraciones Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Marcado CE (véase la declaración de conformidad) To EU EMC Directive In accordance with EU RoHS Directive
Certificación RCM trademark
Power supply, number of pins/wires 4
Power supply, connection type Plugs
Rotor position transducer resolution 16 bit
Nominal current 5,3 A
Consumo de corriente máx. 5.300 mA
Insulation protection class B
Features of digital logic outputs Configurable Not galvanically isolated
Velocidad máxima 1,2 m/s
Indicación de dispuesto para el funcionamiento LED
Funciones adicionales User interface Integrated end-position sensing
Rotor position sensor, encoder measuring principle Magnetic
Referencing Positive fixed stop block Negative fixed stop block
Símbolo 00997293
Forma constructiva Electromechanical linear axis With toothed belt With integrated drive
Posición de montaje Horizontal
Toothed-belt stretch 0,094 %
Working stroke 500 mm
Material toothed belt clamping piece Beryllium bronze
Material pulleys High-alloy stainless steel
Nota sobre el material RoHS-compliant
Logic interface, plug pattern 00992264
Logic interface, connection technology M12x1, A-coded according to EN 61076-2-101
IO-Link, connection technology Plugs
Switching logic for outputs PNP (positive switching)
IO-Link®, memoria de datos necesaria 500 Byte
IO-Link®, contenido de datos de servicio IN 32-bit force 32-bit position 32-bit speed
IO-Link®, ancho de datos de proceso IN 2 bytes
IO-Link®, ancho de datos de proceso OUT 2 bytes
IO-Link®, Port class A
IO-Link®, versión de protocolo Device V 1.1
IO-Link®, compatibilidad con SIO-Mode Yes
Specification logic input Based on IEC 61131-2, type 1
Number of digital logic outputs 24 V DC 2
Aumento masa móvil por 10 mm de carrera 0,31 g
Feed constant 58 mm/U
Max. feed force Fx 50 N
Fuerza máx. Fy 50 N
2nd moment of area Iy 3.770 mm⁴
Temperatura ambiente 0 °C ... 50 °C
Grado de protección IP20
Temperatura de almacenamiento -20 °C ... 60 °C
Resistencia a los golpes Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Símbolo KC KC-EMV
Power supply, connection pattern 00995989
power supply, connection system M12x1, T-coded according to EN 61076-2-111
Fluctuaciones de tensión admisibles +/- 15%
Parameterisation interface IO-Link User interface
Nominal voltage DC 24 V
Max. current digital logic outputs 100 mA
Tiempo de conexión 100%
Precisión de repetición ±0.1 mm
Max. acceleration 8,5 m/s²
Indicación LED
Temperature monitoring Switch-off for excessive temperature Integrated precise CMOS temperature sensor with analogue output
Rotor position sensor Absolute single-turn encoder
Detección de posición Motor encoder Via proximity switch
Type of motor Stepper motor
Guía Recirculating ball bearing guide
Toothed-belt pitch 2 mm
Tamaño 35
Effective diameter of drive pinion 18,46 mm

Productos relacionados

8083931
FESTO
$1.410,23
8083934
FESTO
$1.444,36
8083932
FESTO
$1.421,60
8083936
FESTO
$1.467,12
8083933
FESTO
$1.583,81
8083667
FESTO
$1.523,06
8083572
FESTO
$1.568,12
8083575
FESTO
$1.712,74
8083666
FESTO
$1.475,64
8083671
FESTO
$1.689,04
8083576
FESTO
$1.770,59
8083573
FESTO
$1.597,03
8083665
FESTO
$1.451,93
8083571
FESTO
$1.510,25
8083672
FESTO
$1.760,15
8083579
FESTO
$2.002
$1.455,72
Stock Pedir cotización
Referencia 8083935
Fabricante FESTO
Unidades Precio / Unidad
1+ $1.455,72

Explore la serie FESTO ELGE
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros