| Material del eje | Nickel-plated steel High-alloy stainless steel | ||
| Material cam | Stainless steel casting Steel High-alloy stainless steel | ||
| Material del émbolo | Die-cast aluminium | ||
| Material del muelle | Spring steel | ||
| Material de la tapa | Die-cast aluminium, coated | ||
| Nota sobre el material | Contains paint-wetting impairment substances RoHS-compliant | ||
| Shaft connection | T22 | ||
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 8,6 l ... 26,6 l | ||
| Spring return torque at 0° swivel angle | 28 Nm ... 84 Nm | ||
| Torque at nominal operating pressure and 90° swivel angle | 29,8 Nm ... 234,3 Nm | ||
| Temperatura ambiente | -50 °C ... 150 °C | ||
| Nota sobre el medio de trabajo/mando | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Temperatura ambiente Ex | -20°C <= Ta <= +80°C -50°C <= Ta <= +60°C 0°C <= Ta <= +150°C | ||
| Tipo de protección contra explosión de gas | Ex h IIC T3 Gb X Ex h IIC T4 Gb X Ex h IIC T6 Gb X | ||
| Categoría ATEX para gas | II 2G | ||
| Protección antideflagrante | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Marcado CE (véase la declaración de conformidad) | To EU Explosion Protection Directive (ATEX) | ||
| Presión nominal de funcionamiento | 2 bar ... 6 bar | ||
| Safety Integrity Level (SIL) | Up to SIL 2 High Demand mode | ||
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) | ||
| Closing direction | Closes to the right Closes to the left | ||
| Modo de funcionamiento | Double-acting Single-acting | ||
| Fitting connection conforms to standard | ISO 5211 | ||
| End-position adjustment range at nominal swivel angle | -5 deg ... 5 deg | ||
| Ángulo de giro | 90 deg ... 180 deg | ||
| Size of valve actuator | 240 |
| Material de los tornillos | High-alloy stainless steel | ||
| Material del cojinete | POM PPS reinforced | ||
| Material del cuerpo | Anodised wrought aluminium alloy | ||
| Material de las juntas | FPM FVMQ NBR | ||
| Material de la placa base | Anodised wrought aluminium alloy | ||
| Conexión neumática | G1/4 1/4 NPT | ||
| Peso del producto | 7.611 g ... 12.549 g | ||
| Spring return torque at 90° swivel angle | 55,4 Nm ... 166,1 Nm | ||
| Note on torque | The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. | ||
| Torque at nominal operating pressure and 0° swivel angle | 57,2 Nm ... 234,3 Nm | ||
| Temperatura de almacenamiento | -20 °C ... 60 °C | ||
| Medio de funcionamiento | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Tipo de protección contra explosión de polvo | Ex h IIIC T105°C Db X Ex h IIIC T175°C Db X Ex h IIIC T85°C Db X | ||
| Categoría ATEX para polvo | II 2D | ||
| Organismo que expide el certificado | DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19 | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Clasificación marítima | See certificate | ||
| Presión de funcionamiento | 2 bar ... 8 bar | ||
| Connection point for positioner and position sensor conforms to standard | VDI/VDE 3845 size AA 2 | ||
| Símbolo | 00991265 00991266 | ||
| Forma constructiva | Rack and pinion | ||
| Posición de montaje | optional | ||
| Shaft connection depth | 24 mm | ||
| End-position adjustment range at 0° | -5 deg ... 5 deg | ||
| Distribución de taladros para la brida | F10 F0710 |
