| Minimum chamfer dimension | rmin | 0,60 | mm |
| Contact angle | α | 15 | ° |
| Distance between the apexes of the pressure cones | a | 10,20 | mm |
| Minimum diameter injection pitch | Etk min | 27,80 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 29,30 | mm |
| Maximum recess radius | ra max | 0,30 | mm |
| Shoulder diameter outer ring | Da | 37 | mm |
| Diameter shaft shoulder | da | 25 | mm |
| Limiting speed for oil lubrication | nG Oil | 60,000 | |
| Fatigue load limit, radial | Cur | 450 | N |
| Basic dynamic load rating, radial | Cr | 10,300 | |
| Diámetro exterior | D | 42 | mm |
| Limiting speed for grease lubrication | nG Grease | 38,000 | |
| Basic static load rating, radial | C0r | 4,250 | |
| Anchura | B | 12 | mm |
| Bore diameter | d | 20 | mm |
| Fabricante | Referencia |
|---|---|
| Marlin-Rockwell Corp. | 104KRDS-ABEC7 |
| Marlin-Rockwell Corp. | 104KRDS-BKE#7 |
| RHP | 7004CTSULP3 |
| SKF | 7004 CD-GA/P4A (SKF) |
| RHP | 7004CTRSULP4 |
| SNR | 17004 |
| SNFA | EX20-7CE1-UL |
| RHP | 7004CTSULP4 |
| GMN | S6004CTAP4UL |
| GPZ Bearings | 36104 |
| KOYO | 7004CGLFGP4 |
| KOYO | 7004CPAGLFTP4 |
| GMN | SH6004CTAP4UL |
| RHP | 7004CTRSULP3 |
| NSK | 7004CTYSULP4 |
| Fafnir | 2MM9104WI-CRUL |
