| Minimum chamfer dimension | rmin | 1,10 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 162,34 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 190,90 | mm |
| Distance between the apexes of the pressure cones | a | 98 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 233 | mm |
| Minimum diameter of shaft shoulder | da min | 124 | mm |
| Maximum fillet radius of shaft | ra max | 2,50 | mm |
| Maximum diameter of housing shoulder | Da max | 226 | mm |
| Reference speed | nϑr | 3,150 | |
| Fatigue load limit, radial | Cur | 12,800 | |
| Basic dynamic load rating, radial | Cr | 250,000 | |
| Diámetro exterior | D | 240 | mm |
| Limiting speed | nG | 4,700 | |
| Basic static load rating, radial | C0r | 245,000 | |
| Anchura | B | 50 | mm |
| Bore diameter | d | 110 | mm |
