| medium-contacting part spacer sleeve material | stainless steel | ||
| medium-contacting part core guide element 1 material | ptfe (polytetrafluorethylene) | ||
| medium-contacting part stopper material | stainless steel | ||
| thermal insulation class of the actuator | h | ||
| coil insulation material (encasement) | epoxy | ||
| protection type ip (max. with suitable connector) | ip65 | ||
| cable plug in delivery | not included | ||
| electrical connection number of contacts | 2 + grounding conductor | ||
| core guide | sliding ring | ||
| pwm frequency max. | 280 hz | ||
| nominal operation/duty cycle | 100 % | ||
| main valve operating principle | piston | ||
| operation | servo-controlled | ||
| Tipo | 6.223 | ||
| main valve orifice 1 (p) (mm) | 20 mm | ||
| qnn value (gas) | 5.390 l/min | ||
| rated power consumption | 16 w | ||
| sealing toward outside material | fkm (fluor rubber) | ||
| seat seal material category | elastomer | ||
| temperature environment min | -10 °c | ||
| temperature medium min | -10 °c | ||
| nominal pressure max | 10 bar | ||
| main valve wetted material | brass | ||
| voltage tolerance negative | 10 % | ||
| voltage max / rated voltage | 24 v | ||
| port connection 2 thread marking | 1 | ||
| port connection 2 type | inner thread | ||
| port connection 1 thread marking | 1 | ||
| Posición de montaje | any | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818079 |
| medium-contacting part core guide element 2 material | ptfe (polytetrafluorethylene) | ||
| medium-contacting part core guide tube material | stainless steel | ||
| medium-contacting part core material | stainless steel | ||
| coil size | 42 mm | ||
| coil type | placed on top | ||
| electrical connection position | in direction of flow left | ||
| electrical connection type | male | ||
| core guide 2 | sliding ring | ||
| operating range | 1:10 | ||
| pwm frequency min. | 180 hz | ||
| switch function | constant | ||
| flow | above seat | ||
| actuator type | plunger valve | ||
| main valve orifice 1 (inch) | 3/4 inch | ||
| pilot control orifice (mm) | 1,2 mm | ||
| kv value (water) | 5,4 m3/h | ||
| pilot control seal material | fkm (fluor rubber) | ||
| seat seal material | fkm (fluor rubber) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 90 °c | ||
| differential pressure max | 10 bar | ||
| nominal pressure min | 0,5 bar | ||
| dc voltage | yes | ||
| voltage tolerance positive | 10 % | ||
| voltage min / rated voltage | 24 v | ||
| port connection 2 thread type | g | ||
| port connection 1 thread type | g | ||
| port connection 1 type | inner thread | ||
| Función de la válvula | a - normally closed - inlet port 1 (p/nc) | ||
| fluidic port connection number | 2 |