a)
Hole pattern:
b)
Reference edge
| A | 14 mm ±0.02 | ||
| H (Tolerance: ±0.02 mm; comes with a height grade of 20 µm.) | 18 | mm | |
| m | 7 | ||
| O (DIN 4762-8.8) | M5 | ||
| T | 75 | mm | |
| Tolerance for H1 shaft included h6 | ± 32 | ||
| V1 | 3 | mm |
| A1 | 7 mm ±0.02 | ||
| H1 | 26 | mm | |
| N | 9 | mm | |
| S | 5.50 | ||
| Tolerance for H (Measured with gauging shaft, nominal dimension "d" and length about 50 mm. Up to 1,800 mm length with parallelism of 10 µm available upon request. ) | ± 20 | ||
| Tolerance for H1 shaft included h7 (Includes shaft tolerance (determined from statistics).) | ± 36 |
| m | 2.50 | kg |