| V | 50 | mm | |
| e | 42 | ||
| m | 10.80 | ||
| O1 (DIN 6912-8.8) | M8x30 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 120 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 8 | mm |
| A | 57 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 36 mm ±0.01 | ||
| N | 15 | mm | |
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M6x16 | ||
| T | 9 | mm | |
| V | 6 | mm |
| m | 5.60 | kg |
