| Width inner ring, lower tolerance | BUT | -0.12 | mm |
| Radial Clearance | Gr | 0 - 0,04 | |
| Shank diameter, large | d5 | 35 | mm |
| length rod end shank | l5 | 10 | mm |
| Thread length Internal thread | l3 | 40 | mm |
| Width of the rod end | C1 | 13 | mm |
| Shank diameter | d4 | 27.50 | mm |
| Outer eye diameter | d2 | 53 | mm |
| Ball diameter | dK | 29 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0.01 | mm |
| Width Across Flat | W | 32 | mm |
| Distance drilling with/shaft start | l7 | 27 | mm |
| Total length internal thread head | l4 | 103.50 | mm |
| Tilt angle | α | 9 | ° |
| Shank Length Internal thread head | h1 | 77 | mm |
| Thread size | d3 | M20x1,5 | |
| Outer flange diameter inner ring | d1 | 24.10 | mm |
| Edge Spacing | r1smin | 0.30 | mm |
| Basic static load rating, radial | C0r | 75,600 | |
| Width inner ring | B | 16 | mm |
| Bore diameter bearing | d | 20 | mm |
| Basic dynamic load rating, radial | Cr | 31,300 | |
| Outside diameter bearing | D | 35 | mm |
| Manufacturer | Part Number |
|---|---|
| Durbal | EF20-20-501 (DURBAL) |
| Askubal | EJ20-D |
| SKF | SI20 C (SKF) |
| SKF | SI20DC |
