REXROTH A2F
559 Products
Discover all the available configurations for the REXROTH A2F product series Bent-axis design, fixed. Find the right product by filtering with Hydraulic fluid, Operating mode, Sizes (NG), Series, Index, Direction of rotation, Directions of rotation, Drive shaft, Drive shafts, Mounting flange, Working port, Port plates for service lines, Valve, Speed sensors, Special version and Standard / special version.
A2F Type Codes
| Series | Catalog Number Format | Description |
|---|---|---|
| A2F | A2F-M- -6- -W-V- - - - | Bent-axis design, fixed |
| A2F | A2F-O- -6- - -V- - - | Bent-axis design, fixed |
| A2F | A2F-E- -6- -W-V- - - - | Bent-axis design, fixed |
Typecode for Catalog Number A2F,
A2F-M- -6- -W-V- - - -
| 001 | Hydraulic fluid |
|---|---|
| Mineral oil and HFD. HFD for sizes 250 to 1000 only in combination with long-life bearing “L“ (without code). HFB-, HFC-hydraulic fluid. Sizes 5 to 200 (without code) | |
| E | HFB-, HFC-hydraulic fluid. Sizes 250 to 1000 (only in combination with long-life bearing “L”) |
| 002 | Series |
| A2F | Bent-axis design, fixed |
| 003 | Drive shaft bearing |
| Standard bearing (without code) | |
| L | Long-life bearing |
| 004 | Operating mode |
| M | Motor |
| 005 | Sizes (NG) |
| 5 | 5 |
| 10 | 10 |
| 12 | 12 |
| 16 | 16 |
| 23 | 23 |
| 28 | 28 |
| 32 | 32 |
| 45 | 45 |
| 56 | 56 |
| 63 | 63 |
| 80 | 80 |
| 90 | 90 |
| 107 | 107 |
| 125 | 125 |
| 160 | 160 |
| 180 | 180 |
| 200 | 200 |
| 250 | 250 |
| 355 | 355 |
| 500 | 500 |
| 710 | 710 |
| 1000 | 1000 |
| 006 | Series |
| 6 | 6 |
| 007 | Index |
| 1 | Size 10 to 180 |
| 3 | Size 300 |
| 0 | Size 5 and 250 o 1000 0 |
| 008 | Direction of rotation |
| W | Viewed on drive shaft, bidirectional |
| 009 | Seal material |
|---|---|
| V | FKM (fluoroelastomer) |
| 010 | Drive shaft |
| A | Splined shaft DIN 5480 |
| Z | Splined shaft DIN 5480 |
| B | Parallel keyed shaft DIN 6885 |
| P | Parallel keyed shaft DIN 6885 |
| C | Cronical shaft |
| 011 | Mounting flange |
| B | 4-hole |
| H | 8-hole |
| 012 | Working port |
| 01 | SAE working ports A and B at rear |
| 02 | SAE working ports A and B at side, opposite |
| 03 | Threaded ports A and B at side, opposite |
| 04 | Threaded ports A and B at side and at rear |
| 10 | SAE working ports, A and B at bottom |
| 17 | Port plate with pressure relief valves for mounting a counterbalance valve |
| 18 | Port plate with pressure relief valves for mounting a counterbalance valve |
| 19 | Port plate with pressure relief valves |
| 012 | Valve |
| 0 | Without valve |
| 1 | Pressure-relief valves (without pressure boost facility) |
| 2 | Pressure-relief valves (with pressure boost facility) |
| 7 | Flushing and boost-pressure valve mounted |
| 8 | Counterbalance valve BVD/BVE mounted |
| 013 | Speed sensors |
| Without speed sensor (without code) | |
| F | Prepared for HDD speed sensor |
| H | HDD speed sensor mounted |
| U | Prepared for DSA speed sensor |
| V | Speed sensor DSA mounted |
| 014 | Special version |
| Standard version (without code) | |
| J | Special version for slew drives (standard with port plate 19) |
| 015 | Standard / special version |
| Standard version (without code) | |
| Y | Standard version with installation variants, e. g. T ports against standard open or close |
| S | Special version |
Typecode for Catalog Number A2F,
A2F-O- -6- - -V- - -
| 01 | Hydraulic fluid |
|---|---|
| HFB, HFC hydraulic fluid Sizes 5 to 200 (without code) | |
| E | HFB, HFC hydraulic fluid Sizes 250 to 1000 (only in combination with long-life bearings 'L') |
| 02 | Series |
| A2F | Bent-axis design, fixed |
| 03 | Drive shaft bearing |
| Standard bearing (without code) | |
| L | Long-life bearing |
| 04 | Operating mode |
| O | Pump, open circuit |
| 05 | Sizes (NG) |
| 5 | 5 |
| 10 | 10 |
| 12 | 12 |
| 16 | 16 |
| 23 | 23 |
| 28 | 28 |
| 32 | 32 |
| 45 | 45 |
| 56 | 56 |
| 63 | 63 |
| 80 | 80 |
| 90 | 90 |
| 107 | 107 |
| 125 | 125 |
| 160 | 160 |
| 180 | 180 |
| 200 | 200 |
| 250 | 250 |
| 355 | 355 |
| 500 | 500 |
| 710 | 710 |
| 1000 | 1000 |
| ... | ... |
| 06 | Series |
|---|---|
| 6 | Series 6 |
| 07 | Index |
| 1 | NG10 to 180 |
| 3 | NG200 |
| 0 | NG5 and 250 to 1000 |
| 08 | Directions of rotation |
| R | Viewed on drive shaft clockwise |
| L | Viewed on drive shaft counter-clockwise |
| 09 | Seals |
| V | FKM (fluor-caoutchouc) |
| 10 | Drive shafts |
| A | Splined shaft DIN 5480 |
| Z | Splined shaft DIN 5480 |
| B | Parallel keyed shaft DIN 6885 |
| P | Parallel keyed shaft DIN 6885 |
| C | Conical shaft |
| 11 | Mounting flanges |
| B | ISO 3019-2 4-hole |
| H | ISO 3019-2 8-hole |
| 12 | Port plates for service lines |
| 05 | SAE flange port A/B at side and SAE flange port S at rear |
| 06 | Threaded port A/B at side and threaded port S at rear |
| 11 | SAE flange ports A/B and S at rear |
| 07 | Threaded ports A/B and S at side |
| 13 | Standard / special version |
| Standard version (without code) | |
| Y | Standard version with installation variants, e.g., T ports against standard open or closed |
| S | Special version |
Typecode for Catalog Number A2F,
A2F-E- -6- -W-V- - - -
| 001 | Hydraulic fluid |
|---|---|
| Mineral oil and HFD. HFD for sizes 250 to 1000 only in combination with long-life bearing “L“ (without code). HFB-, HFC-hydraulic fluid. Sizes 5 to 200 (without code) | |
| E | HFB-, HFC-hydraulic fluid. Sizes 250 to 1000 (only in combination with long-life bearing “L”) |
| 002 | Series |
| A2F | Bent-axis design, fixed |
| 003 | Drive shaft bearing |
| Standard bearing (without code) | |
| L | Long-life bearing |
| 004 | Operating mode |
| E | Motor, plug-in version |
| 005 | Sizes (NG) |
| 28 | 28 |
| 32 | 32 |
| 107 | 107 |
| 125 | 125 |
| 160 | 160 |
| 180 | 180 |
| 250 | 250 |
| 355 | 355 |
| 006 | Series |
| 6 | 6 |
| 007 | Index |
| 1 | Size 28 to 180 |
| 0 | Size 250 to 355 |
| 008 | Direction of rotation |
| W | Viewed on drive shaft, bidirectional |
| 009 | Seal material |
| V | FKM (fluoroelastomer) |
| 010 | Drive shaft |
| A | Splined shaft DIN 5480 |
| Z | Splined shaft DIN 5480 |
| 011 | Mounting flange |
|---|---|
| L | ISO 3019-2 2-hole |
| M | ISO 3019-2 4-hole |
| 012 | Working port |
| 02 | SAE working ports A and B at side, opposite |
| 10 | SAE working ports, A and B at bottom |
| 17 | Port plate with pressure relief valves for mounting a counterbalance valve |
| 18 | Port plate with pressure relief valves for mounting a counterbalance valve |
| 19 | Port plate with pressure relief valves |
| 012 | Valve |
| 0 | Without valve |
| 1 | Pressure-relief valves (without pressure boost facility) |
| 2 | Pressure-relief valves (with pressure boost facility) |
| 7 | Flushing and boost-pressure valve mounted |
| 8 | Counterbalance valve BVD/BVE mounted |
| 013 | Speed sensors |
| Without speed sensor (without code) | |
| U | Prepared for DSA speed sensor |
| V | Speed sensor DSA mounted |
| 014 | Special version |
| Standard version (without code) | |
| J | Special version for slew drives (standard with port plate 19) |
| 015 | Standard / special version |
| Standard version (without code) | |
| Y | Standard version with installation variants, e. g. T ports against standard open or close |
| S | Special version |