| D | 47 | mm | |
| C | 68 | mm | |
| C2 | 1,85 |
| Componente Industrial | 57 | mm | |
| C1 | 51,70 | H13 | |
| e (Minimum size in relation to Ø d.) | 14 |
| amáx | 150 | m/s² | |
| protección de máquina | 0,16 | kg | |
| Fuerza de arranque (One wiper seal: Multiply by a factor of 0.5.) | 6 | N | |
| Filas de bolas | 5 | ||
| Holgame radial del eje h6/diámetro interior K7 | + 25 - 7 |
||
| Condiciones de operación | Operating conditions |
| vmáx (Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. ) | 3 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 2,50 | N | |
| protección de máquina (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,0025 | ||
| Holgura radial del eje h6/diámetro interior H7 | + 43 + 11 |
||
| Holgura radial del eje h6/diámetro interior M7 | + 18 - 14 |
||
| Temperatura ambiente permitida (mín ... máx) | -10 °C ... +80 °C |
