| D | 20 | mm |
| C | 24 | mm |
| amáx | 150 | m/s² | |
| protección de máquina | 0,01 | kg | |
| Fuerza de arranque | 3 | N | |
| Filas de bolas | 5 | ||
| Holgame radial del eje h6/diámetro interior K7 | + 17 - 15 |
||
| Temperatura ambiente permitida (mín ... máx) | -10 °C ... +80 °C |
| vmáx | 3 | m/s | |
| FR (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 1,50 | N | |
| protección de máquina (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,004 | ||
| Holgura radial del eje h6/diámetro interior H7 | + 32 0 |
||
| Condiciones de operación | Operating conditions |
