REXROTH R061208010 ROD.LIN.ESTANDAR

KBM-E-80-DD

$755,51
12 uds. con envío de 1 a 3 días a Mexico

Especificaciones

  • Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination
  • Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life
  • For use in woodworking, foundries, cement plants
  • Stainless steel for the medical, chemistry and food industries
  • Integrated wiper seals

Tipo (KB) Standard linear bushings adjustable, with wiper seals, R0612
Serie (M) Standard (metal)
Forma (E) Adjustable
Diámetro del eje (80) 80 Shaft diameter
Juntas (DD) With two seals
D 120 mm
C1 133,30 H13
D1 114 mm
C 165 mm
C2 4,15
e 2
amáx 50 m/s²
protección de máquina 4,70 kg
Fuerza de arranque (One wiper seal: Multiply by a factor of 0.5.) 45 N
Filas de bolas 6
Holgame radial del eje h6/diámetro interior K7 + 46
- 1
Temperatura ambiente permitida (mín ... máx) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) -10 °C ... +80 °C
vmáx 2 m/s
FR (One wiper seal: Multiply by a factor of 0.5.,Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) 15 N
protección de máquina (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) 0,001 ... 0,004
Holgura radial del eje h6/diámetro interior H7 + 71
+ 24
Condiciones de operación Operating conditions
$755,51
Stock 12 uds.
Referencia R061208010
Fabricante REXROTH
Unidades Precio / Unidad
1 - 4 $755,51
5+ $740,40

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros