| D | 7 | mm | |
| C1 | - | ||
| D1 | - |
| C | 10 | mm | |
| C2 | - |
| amáx | 100 | m/s² | |
| protección de máquina | 0 | kg | |
| Fuerza de arranque | - | ||
| Filas de bolas | 4 | ||
| Holgame radial del eje h6 (Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. ) | + 12 + 2 |
||
| Temperatura ambiente permitida (mín ... máx) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) | -10 °C ... +80 °C |
| vmáx | 2,50 | m/s | |
| FR | - | ||
| protección de máquina (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,004 | ||
| Tolerancia del diámetro del orificio de trabajo | + 8 0 |
||
| Condiciones de operación | Operating conditions |
