| Tamaño | 44 | ||
| Actuator lock | Adjusting screw with lock | ||
| Grado de filtración | 5 µm | ||
| Forma constructiva | Filter regulator without pressure gauge | ||
| Max. condensate volume | 12 ml | ||
| Símbolo | 00991586 | ||
| Presión de funcionamiento | 1 bar ... 20 bar | ||
| Histéresis máxima de la presión | 0,2 bar | ||
| Standard nominal flow rate | 1.600 l/min | ||
| Medio de funcionamiento | Compressed air to ISO 8573-1:2010 [-:4:-] Inert gases | ||
| Temperatura de almacenamiento | -20 °C ... 80 °C | ||
| Temperatura del medio | -20 °C ... 80 °C | ||
| Peso del producto | 665 g | ||
| Pressure gauge connection | G1/4 | ||
| Conexión neumática 2 | G1/4 | ||
| Material number of drain screw | 1.4404/316L | ||
| Nota sobre el material | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material de las juntas | CR NBR | ||
| Material filter | PE | ||
| Código de material del cuerpo | 1.4409/CF3M(316L) | ||
| Material de la funda | Stainless steel casting |
| Serie | P | ||
| Posición de montaje | Vertical +/-5° | ||
| Purga de condensado | Manually rotating | ||
| Conforme a la norma | NACE MR0175/ISO 15156 (housing and bowl) | ||
| Controller function | Via primary pressure compensation With secondary venting | ||
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4 | ||
| Margen de regulación de presión | 0,5 bar ... 12 bar | ||
| Max. standard flow rate | 2.400 l/min | ||
| Protección antideflagrante | The information in the certificate must be observed! Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Nota sobre el medio de trabajo/mando | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Clase de pureza del aire en la salida | Compressed air to ISO 8573-1:2010 [6:4:4] | ||
| Temperatura ambiente | -20 °C ... 80 °C | ||
| Tipo de fijación | In-line installation Via mounting kit Either: | ||
| Conexión neumática 1 | G1/4 | ||
| Material of drain screw | High-alloy stainless steel | ||
| Material filter carrier | POM | ||
| Material mounting bracket | High-alloy stainless steel | ||
| Material del muelle | High-alloy stainless steel | ||
| Material del cuerpo | Stainless steel casting | ||
| Material del tornillo de regulación | High-alloy stainless steel | ||
| Material number of bowl | 1.4409/CF3M (316L) |
